Another Tichy Boom Car, but with a National Scale Car Mini Kit addition

I am working my way though my kit supply, slowly but surely of late. In 2020 I built a Tichy Trains steam crane and boom car for Canadian National to have an auxiliary train. Its not something that I need for my layout, but its a kit I have wanted to build for years. So of course, why have one set of equipment you don’t need when you can have two? I’ve started a second crane and boom car, this time for the Canadian Pacific. The real prompt for this was my friend Ryan making a cast resin “Mini-Kit” of fishbelly side sills for the Tichy Boom car to quickly change its look. I figured, why not? The Tichy kits are relatively cheap, and fun, quick builds.

Preparing and installing the National Scale Car “fishbelly” side sill mini kit on the Tichy Boom Car.

The resin sides in the mini kit are designed to be straight replacements for the straight sides in the Tichy kit. The instructions suggest how to build extensions on the cross members to actually support the deeper sides. You can see the white styrene extensions in the pictures above. These were capped with a thin strip, then had Archer Rivet decals added before painting. Will anyone ever see this? Not Really, but it pleases me to have done it right. If you really didn’t want to do this, but wanted the look of the fishbelly sides, it isn’t necessary to give the car strength.

I ran into one problem on the underbody, for some reason, the kit only had one of the injection molded coupler box covers. To remedy this, thanks to the fact that I have learned to cast resin, I quickly used the part I had to make a mold, and cast replacement coupler box covers. The are not perfect, but they more than do the job, and certainly beat waiting months for a replacement part to come from Tichy.

Assembling and adding details to a boom car. I flipped the B end to the cabin, added windows, grab iron ladders and a tar paper roof with a wooden walk.

For the cabin, working from photos of CPR cars, I added a variety of windows. Maintenance cars like these were not really built to a set plan. They were converted as needed from old flat cars, and were modified as needed by crews when in use. I added two side windows, and two windows on the deck end using Tichy work car windows set. I also, to be perfectly honest, messed up installing the side sills, and got them on wrong sided. Why is this an issue? Under the car, my brake rigging was pointing the wrong way. Being solutions oriented, after a few minutes being annoyed, I set forth to change the brake configuration and add a tall stand on the cabin end extending to the roof. Not the most practical for the crew compared to a brake wheel on the deck end, but it adds visual interest to differentiate the car from my CN Boom Car. For ladders and grab irons, I went with a variety of wire grabs of different sizes, and set up differently on each side of the car to help add that jumbled look.

I scrapped off the roof detail, and laminated on 600 grit sandpaper, my fake tar-paper of choice. I made a new roof walk from strip wood, added a smoke jack chimney with braces made from brass wire, and painted it.

Scenes from Painting and Decalling, yeah, I did this backwards. I should have painted the steel then masked it, instead of the other way around, but once its weathered the difference will be gone.

Painting and decalling and finishing is pretty basic same same. I think I managed to use the same oxide red on the CP car as the earlier CN car looking at them together. Doesn’t matter. They will eventually be weathered and dirty and never be seen beside each other on the layout!

Yup, I have a half dozen shades of oxide/boxcar red and I painted the two boom cars with the same one. Whatever, doesn’t matter. Weathering will take care of that when its done! Comparing the differences between the CN and CP cars.

The build is done. As with so many of my freight car kits, it will now inevitably sit around until a mood to do a bunch of weathering strikes me, but that’s OK by me, I’m quite happy to move things along and take one more thing from the kit pile to the tracks. I’ve made a start on the crane to go with this. Haven’t gotten very far, but its on the work bench moving along slowly but surely. Still need to figure out how much I am going to do on the crane in creating a fully enclosed cab like on the CN crane, but that is for another day.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s